FlashForge
Creator 5 Pro
Up to 4 toolheads, whole-toolhead exchange
We don't have this machine, so there's no photo. We don't use manufacturer renders.
Overview
We don't have this printer. Everything on this page comes from the manufacturer, with a source for each fact. See the machines we're testing.
An enclosed four-toolhead printer with an actively heated chamber, built on the same platform and build volume as the Creator 5.
The Creator 5 Pro carries four independent toolheads, each with its own nozzle, which Flashforge markets as the FlashSwap system. The printer automatically calibrates the offsets between toolheads and switches between them during a print, so filament is not purged on material changes.
Flashforge describes it as the Creator 5 plus an enclosed chamber, active chamber heating to 65 °C, HEPA/carbon filtration, and door detection. The standard configuration has no automatic multi-spool feeder, so each toolhead's filament is loaded by hand.
Specifications
What FlashForge says, with a source for every line. Their maximums describe the machine's limits, not how fast or well a real print goes.
| Tools | 41 |
|---|---|
| Tool change time | Not published1No tool-change time is published on the product page. |
| Build volume | 256 × 256 × 256 mm1 |
|---|
| Max nozzle temperature | 320°C1 |
|---|---|
| Max bed temperature | 120°C1 |
| Chamber heating | Active, up to 65 °C1 |
| Motion system | Not published1Not stated on the official product page. |
|---|---|
| Max travel speed | 600 mm/s1Travel speed. Print speed is listed as max 300 mm/s. |
| Max acceleration | 30,000 mm/s²1 |
| Default nozzle | 0.4 mm10.25, 0.6 and 0.8 mm are optional. |
|---|---|
| Filament diameter | Not published1Not listed in the spec table. |
| Listed materials | PLA, PETG, TPU-90A, TPU-95A, TPU-64D, PLA-CF, PETG-CF, SILK, PVA, BVOH, S-Multi, S-PAHT, ABS, ASA, PA-CF, PET-CF, PAHT-CF, ASA-CF, ASA-GF, ABS-GF, PPA-CF, PPS-CF, HIPS1TPU-90A requires the top external mount. |
| Enclosure | Fully enclosed frame1 |
|---|---|
| Machine size | 441 × 411 × 460 mm1With the filament tube and holders: 520 × 443 × 710 mm. |
| Machine weight | 18 kg1 |
| Bed leveling | Automatic1 |
|---|---|
| Official slicer | Orca-Flashforge, OrcaSlicer1 |
| Connectivity | USB, Wi-Fi 2.4 GHz, Wi-Fi 5 GHz1 |
| Display | 4-inch 800 × 480 color touchscreen1 |
Our measurements
Results from our own runs, tied to the exact configuration, firmware, and benchmark version.
Not tested. This printer isn't in our lab, so we have nothing of our own to report.
Benchmarks are drafts until we've piloted them on all three machines. How we test
Updates
No firmware or hardware changes recorded for this printer yet.
Where to buy
Manufacturer first, then other stores we've checked. We don't show prices until we can keep them current.
- FlashForgeManufacturer's official page, link checked October 6, 2026Check price at FlashForge
None of these are affiliate links. Disclosures
Sources and history
- Flashforge Creator 5 Pro 4-Toolheads Enclosed Multi-Color 3D Printer Flashforge, checked October 6, 2026